சீனாவின் நம்பகமான PCB சப்ளையர்
PCB க்கான அறிவு How to Make a Multi-layers Printed Circuit Board (PCB)

How to Make a Multi-layers Printed Circuit Board (PCB)

September 20, 2022     PCB க்கான அறிவு

Multilayer PCB is Printed Circuit Board with more than 2 layer. Multilayer PCB must have 3 conductive layers Interconnected with copper plated holes.

Multilayer PCB is a Printed Circuit Board with more than 2 layers. A Double-Sided PCB has two conductive layers on top and bottom of the PCB substrate. A Multilayer PCB must have a minimum of 3 conductive layers of conductive material or copper layer. All the layers are interconnected with copper-plated holes. The layers can be 4, 6, 8… up to 40 layers.

A multilayer PCB is complex by design. The top and bottom layers look same as a double-sided PCB but have staked layers on both sides of the core. All the layers are compressed to form a single Multilayer PCB where all the layers are interconnected via copper-plated holes.

All the active and passive electronic components are assembled on top and bottom layers. All the inner stacked layers are meant for routing. Both through-hole electronic components and Surface Mount Components (SMD) can be soldered on either side of this type of PCB. SMD components can be soldered with Surface Mount Technology and other PCBA Tools. A general Multilayer Printed Circuit Board has the following layer stacking:

  • Top Layer ( Electronic Components)
  • Inner Layer-1 (Routing)
  • Inner Layer-2 (Routing)
  • Inner Layer-3 (Routing)
  • Bottom Layer ( Electronic Components

Multilayer PCB Manufacturing Process

Multilayer PCB manufacturing process needs special precaution as there are more chances of cross connections, overlaps, tracing in copper areas, முதலியன. The whole process needs to be done in an ESD-Safe and Cleanroom environment. Special manufacturing setup and equipment are needed for the 8+ layer PCB manufacturing process.

Following are the steps involved in Multilayer PCB Manufacturing Process:

  1. The process starts with designing Layout of the PCB using any PCB designing software / CAD Tool (Altium,Proteus, Eagle, OrCAD).
  2. Next step is to make the Inner Layer Core. Laminate of desired thickness is treated with Copper foil, dry film resist and UV light to make the inner layer core.
  3. Next step is lamination. This process include: Inner layer core, prepeg sheets and copper foil sheets. The sheets of material are staked on each other and holes are used to align them as they are stacked up.
    For a 4 layer board, Staking of layers is as follows: Bottom Layer of Copper Foil Prepeg Sheets The Inner Layer Core More Prepeg Sheets Finally Copper Foil Sheet on Top.
  4. Next step is to apply pressure, heat and vacuum using a heated hydraulic press. Vacuum is important to make sure there is no air trapped between the layers. This process ends over 2 hours depending on number of layers.
  5. Once cured, resins from the prepegs join the sheets, core, and foil together forming a multilayer PCB.

BENEFITS OF MULTILAYER PCBS (COMPARED TO SINGLE OR DOUBLE-SIDED PCBS)

  1. Reduced PCB Size / small size (Saves space).
  2. Lightweight
  3. High quality and density
  4. Better durability and flexibility
  5. Powerful with Single Connection Point

APPLICATIONS OF MULTILAYER PCBS

Multilayer Printed Circuit Boards offer more flexibility and increased circuit density with reduces size. This is why many electronic companies in the world use these boards in several electronic devices and gadgets:

  • Computers and Laptops
  • Telecommunications Equipment – Mobile Phone, Tablets and other Hand Help Devices
  • File server and Data storage
  • Signal transmission, mobile phone repeaters, GPS
  • Satellite
  • Medical Equipment: Testing, X-Ray, Heart Monitor, CAT Scan
  • Industrial Equipment
  • Atomic and Nuclear Systems
  • Military and Defense Equipment
  • Automotive
  • Aerospace
  • Anywhere, where complex Circuitry is needed.

பல அடுக்குகள்-PCB-சீனா-02 பல அடுக்குகள்-PCB-சீனா பல அடுக்குகள்-PCB-சீனா-03

WDXPCB IS AN EXPERIENCED MULTILAYER PCB MANUFACTURER

Wdxpcb has been producing multiple layers PCBs since 2003. We have the processing capability for up to 40layers constructions, and solve all kinds of multi-layers PCB requests for customers.

 

 


MAY BE YOU LIKE ALSO

  • wdxpcb

    WDXPCB என்பது ஷென்செனில் அமைந்துள்ள தொழில்முறை PCB உற்பத்தியாளர் மற்றும் ஏற்றுமதியாளர், சீனா. HDI உட்பட PCB உற்பத்தி சேவைகளை வழங்குகிறது,FPC,ரிஜிட்-ஃப்ளெக்ஸ் பிசிபி,உயர் பல அடுக்கு PCB,மற்றும் MCPCB

  • எங்களை தொடர்பு கொள்ள

    டெல்: +86-75582944255,82945142
    தொலைநகல்: +86-26648548
    மின்னஞ்சல்: market@pcbtrue.com

    தலைமை அலுவலகம்:அலகு 502, தொகுதி பி, ஜின்யுவான் வணிக கட்டிடம், இல்லை. 300 Xixiang அவென்யூ, பாவோ'ஆன் மாவட்டம், ஷென்சென், சீனா

  • நீங்கள் தயாரா? இப்போது இலவச மேற்கோளைப் பெறுங்கள்!

    விரைவாக மேற்கோள்

    இந்த தகவல் மூன்றாம் பாகத்திற்கு பகிரப்படாது